Offene Stellen bei Gerresheimer

Mechanical Service Technician Injection Molding

650 Highway 74 South, United States | Peachtree City | Full-time

Job Description

The Mechanical Service Technician IM will act as the first line in trouble shooting and repair of plastic injection molding equipment.  In addition, this Technician will foster an environment of continuous improvement and teamwork.


  • Repair/replace brakes & clutches, gears, belts, sheaves/pulley, chains and sprockets, cams, seals and o-rings, bearings and bushings.  Replace couplings and valves (cut-off, pressure relief, etc).
  • Troubleshoot/repair/replace, gears, cams, seals, o-rings, bearings, bushings, shafts and motors.  
  • Troubleshoot/maintain chains and sprockets. Perform basic alignment.
  • Maintain couplings and fans.
  • Install/maintain valves (cut-off, pressure relief, etc).




  • Troubleshoot/repair/replace cylinders and pneumatic/hydraulic motors.  
  • Maintain hydraulic systems, pumps and valves.
  • Repair/replace pneumatic/hydraulic lines, hoses, and solenoids.
  • Repair/replace flow controls (pneumatic or hydraulic).
  • Troubleshoot/maintain air compressors.


  • Troubleshoot/repair/replace/maintain vibratory, linear motion, and material conveying systems.
  • Repair/replace belt conveyor systems.


  • Troubleshoot/maintain centrifugal, vacuum, gear, diaphragm, positive displacement and metering pumps.
  • Perform alignment.
  • Maintain heat exchanger and pipe insulation systems.


  • Perform welding and fabrication tasks, sheet metal fabrication, pipefitting duties and rigging tasks.
  • Perform basic math operations.
  • Operate common hand and power tools, use measuring devices and precision devices.


  • Apply knowledge of AC theory and run wire and conduit.
  • Install/repair basic AC and DC controls, building electrical systems.
  • Operate electrical test equipment.
  • Fabricate/retrofit electrical control panels.
  • Repair ground fault detection systems.
  • Repair/replace low voltage transformers <480 and replace fuses and breakers (<600 V).
  • Repair/replace AC motors, starters and relays.
  • Maintain ground fault detection system.


  • Modify ladder logic and edit PLC software.
  • Troubleshoot/replace/install circuit boards.
  • Install/maintain/troubleshoot photo eyes and basic VFD drives (Variable Frequency Drive).
  • Install/maintain/troubleshoot limit and proximity switches & bar code readers.
  • Calibrate/install/repair basic flow and density, temperature, pressure transmitters, gages and switches
  • Calibrate proportional control valves and process control loop (PID).
  • Install/calibrate load cells.
  • Troubleshoot/replace transducers.
  • Align and replace photo eyes.
  • Install load cells.
  • Repair/replace VFD drives (Variable Frequency Drive), limit and proximity switches.


  • Troubleshoot/repair/replace/maintain robots.
  • Design/FAB/troubleshoot end of arm tooling
  • Program pick/place points


  • Setting the example for professionalism in all activities.
  • Maintain housekeeping of work area.
  • Consult and work with direct manager on all technical issues.
  • Notify direct manager of any non-standard or sub-performance operational issues as well as quality and safety issues.
  • Ensure safety adherence.
  • Ensure that established policies, procedures, rules and regulations are understood and followed.
  • Participate in all training programs as well as the GMS.


  • High School Diploma.
  • Requires a minimum of 2 years maintenance/technical experience within an plastic injection molding facility.
  • Requires a minimum of 1 year mechanical/electrical experience.
  • Requires a minimum of 2 years general preventative maintenance experience in medical injection molding industry.
  • Prior diagnostic/troubleshooting and preventative experience preferred.
  • Ability to read blue prints, manufacturer's specifications and schematics.
  • Required to supply hand tools.
  • Must have good interpersonal skills with the ability to interface constructively and cooperatively with a wide variety of departmental staff and intra-department personnel.
  • Experienced knowledge of Good Manufacturing Practice within the Medical or Food Industry.
  • Experience working in a fast paced operational environment with constant interaction with operators, technicians and equipment.
  • Experience in problem solving and trouble shooting of processes and process equipment.
  • Attention to detail and accuracy.
  • Good organizational and planning skills.
  • Ability to work well within a team environment and capable of completing projects with minimal supervision.
  • Excellent verbal communication skills.
  • Required to speak, read and write English language.

Additional Information

All your information will be kept confidential according to EEO guidelines.

12 hour shift work is required on a 2:2:3 basis



Food & drinks

We have a self -serve break area with drinks, snacks & light finger food for purchase.

Learning & development

According to the job and position, we make sure our employees get regular trainings and coaching to unleash their possibilities. We offer education reimbursement.

Healthcare & pension

Your health and well-being is important to us. We offer the following benefits: 401 K Match up to 4.5%, Medical/ RX/ Dental/ Vision, Life LTD & STD, Optional Accidental / Critical Care and Illness & Hospitalization, Optional Spouse & Child

Working environment

Creating a great place to work is essential for us, so we live up to our values teamwork, responsibility, integrity, bold innovation and excellence (TRIBE).

Wellness & other incentives

Referral program, Gym incentive, Pacer step challenge

Hinweis: Benefits können je nach Position variieren.

About Gerresheimer

Gerresheimer is the global partner for pharmaceutics, biotech, healthcare, and cosmetics with a very broad product range for pharmaceutical and cosmetic packaging solutions and drug delivery systems. The company is an innovative solution provider from concept to delivery of the end product. Gerresheimer achieves its ambitious goals through a high level of innovative strength, industrial competence and concentration on quality and customer focus. In developing innovative and sustainable solutions, Gerresheimer relies on a comprehensive international network with numerous innovation and production centers in Europe, America and Asia. Gerresheimer produces close to its customers worldwide with around 12,000 employees and generated annual revenues in 2023 of around EUR 2bn. With its products and solutions, Gerresheimer plays an essential role in people's health and well-being.

Equal Rights

We commit to an inclusive recruitment process and equality of opportunity for all our job applicants. All applicants are considered without any regard to color, creed, religion, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status or membership, or any other legally protected status. Preference is given to hiring people with disabilities.

Interested? Apply today!

[Translate to German:]