Jobs at Gerresheimer

Injection Molding Maintenance Technician

650 Highway 74 South, United States | Peachtree City | Full-time

Job Description

MECHANICAL AND ELECTROMECHANICAL EQUIPMENT

  • Repair/replace brakes & clutches, gears, belts, sheaves/pulley, chains and sprockets, cams, seals and o-rings, bearings and bushings.  Replace couplings and valves (cut-off, pressure relief, etc).
  • Troubleshoot/repair/replace, gears, cams, seals, o-rings, bearings, bushings, shafts and motors.  
  • Troubleshoot/maintain chains and sprockets. Perform basic alignment.
  • Maintain couplings and fans.
  • Install/maintain valves (cut-off, pressure relief, etc).

 PNEUMATIC/HYDRAULIC EQUIPMENT

  • Troubleshoot/repair/replace cylinders and pneumatic/hydraulic motors.  
  • Maintain hydraulic systems, pumps and valves.
  • Repair/replace pneumatic/hydraulic lines, hoses, and solenoids.
  • Repair/replace flow controls (pneumatic or hydraulic).
  • Troubleshoot/maintain air compressors.

 CONVEYING SYSTEMS

  • Troubleshoot/repair/replace/maintain vibratory, linear motion, and material conveying systems. Repair/replace belt conveyor systems.

 PUMPS SYSTEMS AND MECHANICAL EQUIPMENT

  • Troubleshoot/maintain centrifugal, vacuum, gear, diaphragm, positive displacement and metering pumps.
  • Perform alignment.
  • Maintain heat exchanger and pipe insulation systems.

 MECHANICAL OPERATIONS

  • Perform welding and fabrication tasks, sheet metal fabrication, pipefitting duties and rigging tasks.
  • Perform basic math operations.
  • Operate common hand and power tools, use measuring devices and precision devices.

 ELECTRICAL, POWER DISTRIBUTION AND ELECTROMECHANICAL SYSTEMS

  • Apply knowledge of AC theory and run wire and conduit.
  • Install/repair basic AC and DC controls, building electrical systems.
  • Operate electrical test equipment.
  • Fabricate/retrofit electrical control panels.
  • Repair ground fault detection systems.
  • Repair/replace low voltage transformers <480 and replace fuses and breakers (<600 V).
  • Repair/replace AC motors, starters and relays.
  • Maintain ground fault detection system.

 MACHINE AND PROCESS CONTROLS

  • Modify ladder logic and edit PLC software.
  • Troubleshoot/replace/install circuit boards.
  • Install/maintain/troubleshoot photo eyes and basic VFD drives (Variable Frequency Drive).
  • Install/maintain/troubleshoot limit and proximity switches & bar code readers.
  • Calibrate/install/repair basic flow and density, temperature, pressure transmitters, gages and switches
  • Calibrate proportional control valves and process control loop (PID).
  • Install/calibrate load cells.
  • Troubleshoot/replace transducers.
  • Align and replace photo eyes.
  • Install load cells.
  • Repair/replace VFD drives (Variable Frequency Drive), limit and proximity switches.
  • Repair flow, pressure, and speed transmitters, gages and switches.

 AUTOMATION

  • Troubleshoot/repair/replace/maintain robots.
  • Design/FAB/troubleshoot end of arm tooling
  • Program pick/place points.

 GENERAL

  • Setting the example for professionalism in all activities.
  • Maintain housekeeping of work area.
  • Consult and work with direct manager on all technical issues.
  • Notify direct manager of any non-standard or sub-performance operational issues as well as quality and safety issues.
  • Ensure safety adherence.
  • Ensure that established policies, procedures, rules and regulations are understood and followed.
  • Participate in all training programs as well as the GMS.

Qualifications

  • High School Diploma.
  • Requires a minimum of 2 years maintenance/technical experience within an plastic injection molding facility.
  • Requires a minimum of 1 year mechanical/electrical experience.
  • Requires a minimum of 2 years general preventative maintenance experience in medical injection molding industry.
  • Prior diagnostic/troubleshooting and preventative experience preferred.
  • Ability to read blue prints, manufacturer's specifications and schematics.
  • Required to supply hand tools.
  • Must have good interpersonal skills with the ability to interface constructively and cooperatively with a wide variety of departmental staff and intra-department personnel.
  • Experienced knowledge of Good Manufacturing Practice within the Medical or Food Industry.
  • Experience working in a fast paced operational environment with constant interaction with operators, technicians and equipment.
  • Experience in problem solving and trouble shooting of processes and process equipment.
  • Attention to detail and accuracy.
  • Good organizational and planning skills.
  • Ability to work well within a team environment and capable of completing projects with minimal supervision.
  • Excellent verbal communication skills.
  • Required to speak, read and write English language.

Additional Information

This is a 12 hr 3-2-2 shift

Benefits

Food & drinks

We offer you a canteen and free beverages.

Learning & development

According to the job and position, we make sure our employees get regular trainings and coaching to unleash their possibilities.

Healthcare & pension

Your health and well-being is important to us. We offer a life and group insurance.

Working environment

Creating a great place to work is essential for us, so we live up to our values teamwork, responsibility, integrity, bold innovation and excellence (TRIBE).

Company Description

Gerresheimer is the global partner for pharma, biotech, healthcare and cosmetics with a very broad product range for pharmaceutical and cosmetic packaging and drug delivery devices. The company is an innovative solution provider from concept to delivery of the end product. Gerresheimer achieves its ambitious goals through a high level of innovative strength, industrial competence, focus on quality and customers. In developing innovative and sustainable solutions, Gerresheimer relies on a comprehensive international network with numerous innovation and production centers in Europe, America and Asia. Gerresheimer produces close to its customers worldwide with around 10,000 employees and generates annual sales of more than €1.4 billion. With its products and solutions, Gerresheimer plays an essential role in people's health and well-being.

Equal rights

All applicants are considered without any regard to race, color, creed, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status or membership, or any other legally protected status.

Interested? Apply today!